 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| notes: 1. leds left/right: g = green; y = yellow. 2. add suffix ? t ? for tape & reel option (e.g. j0c-0004 t ). 3. rohs-5 - product does not contain 5 out of the 6 banned substances specified in the rohs directive. product contains lead in applications considered as solders. 4. rohs-6 - product does not contain 5 out of the 6 banned substances specified in the rohs directive. some internal connections may contain lead in high temperature solder (solder alloys containing more than 85% lead). 5. extended temperature: -40 to 85 c features and benefits: rohs-5 peak reflow temperature rating 235c rohs-6 peak reflow temperature rating 245c j0c smt product, reduced size and low cost alternative to jv series electrical performance summary: meets ieee 802.3 specification high performance for maximum emi suppression minimum 1500vrms isolation per ieee 802.3 requirement mating force unmating force plug to jack part number (max) (max) durability retention (min) j0c/jv/j3 series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 insertions 20 lbs./9.072 kgs . rj45 durability testing rating description: 10/100base-tx surface mount rj45 single port (1x1) tab-up/down with or without leds integrated magnetics connector, designed to support applications such as: set top box and network interface cards (nic). jv0 j0c smt contacts j30 insertion return loss common mode hipot rohs-5 3 rohs-6 4 turns loss (db min) crosstalk rejection (vrms) compliant compliant ratios tab leds 1 bst emi tx/rx 100 ( 15 ) (db min) (db min) (min) part no. part no. option l/r circuit finger (db max) tx rx up/down 1-65 1-10 30 60-80 1-10 30-60 60-100 1-50 50-130 @60 hz mhz mhz mhz mhz mhz mhz mhz mhz mhz 1 min j0c-0003 j0c-0003nl 1ct:1 1ct:1 down no no no -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 j0c-0004 j0c-0004nl 1ct:1 1ct:1 down no no yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 j0c-0005 j0c-0005nl 1ct:1 1ct:1 down no yes no -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 j0c-0006 j0c-0006nl 1ct:1 1ct:1 down no yes yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 jv006i21 jv006i21nl 1ct:1 1ct:1 down no no yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 jv011i21 JV011I21NL 1ct:1 1ct:1 down no yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 jv026i21 jv026i21nl 1cts:1 1ct:1 down no yes yes -1.0 - 20 -16 -12 -40 -35 -30 -30 -20 1500 j3006g21d j3006g21dnl 1ct:1 1ct:1 up g/y no yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 j3011g21d j3011g21dnl 1ct:1 1ct:1 up g/y yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 j3018g21k _ 1cts:1.414 1ct:1 up g/g yes yes -1.0 -20 -16 -11.5 -40 -35 -30 -30 -20 1500 j3026g01d j3026g01dnl 1cts:1 1ct:1 up g/y yes no -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 j3026g21d j3026g21dnl 1cts:1 1ct:1 up g/y yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 _ jx30-0005nl 5 1ct:1 1ct:1 up g/y yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 electrical specifications @ 25c ? operating temperature 0c to +70c p ulse j ack tm surface mount 1x1 notes: 1. connector dimensions comply with fcc part 68 dimension requirements. 2. msl =moisture sensitivity level rating: 1-5 (highest rating = 1, lowest rating = 5). 3. ( x )=30 inches gold for jv and j30 platforms and 15 inches gold for j0c platform. 4. the msl rating for j0c-000x is level 4. all other connectors are level 1. 5. nl parts are tin matte finish over nickel. part shield contact housing msl 2 number material finish material plating area 3 solder area 5 material specification rating j0c/jv/j3 20-40 inches thick nickel phosphor ( x ) inches gold over 75-300 inches tin-lead over high temp. series brass over brass bronze 30-80 inches nickel 30-80 inches nickel thermoplastic ul 94 v-0 1 4 rj45 material specification www.pulseeng.com 1 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811
p ulse j ack tm surface mount 1x1 j0c platform schematics j0c-0005/6 j0c-0003/4 www.pulseeng.com 2 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 jv platform schematics jv006 jv011 jv026 www.pulseeng.com 3 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 j3 platform schematics j3006 j3011 j3018/j3026 jx30-0005nl !"# !$% www.pulseeng.com 4 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 j0c platform mechanicals (j0c-0003/5 - same platform without emi fingers) j0c-0004/6 emi fingers emi fingers www.pulseeng.com 5 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 jv platform mechanicals jv series dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 www.pulseeng.com 6 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 j3 platform mechanical j3 series ! dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 jx30-0005nl & j3026g21d with emi tabs www.pulseeng.com 7 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 j0c application note this line of 10/100base-tx smt rj45 1x1 connector magnetics modules has been specifically designed for the implementation of a 10base-t and 100base-tx transmission over data-grade unshielded twisted pair cable (utp-3, 5e and 6). the connectors provide excellent emi filtering and are suitable for adapter card and multiport applications. pulse has worked closely with the leading ic manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. the jc0 series meets the stringent open circuit inductance requirements imposed by ieee. when an 8ma dc current is applied across the transformer windings, the transformer will provide at least 350h. the transformers used in each module also provide 1500vrms minimum isolation, wide bandwidth with minimal attenuation and fast rise times to minimize system level jitter. the 1x1 smt rj45 connectors manufactured by pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. the smt are robust enough to withstand convection and infrared reflow solder temperatures. additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10mm (0.004") note: modules are packaged in trays, unless tape & reel is specified. please add the suffix " t " for tape & reel orders (ex: j0c-0003 t ). add the suffix ? nl ? for rohs compliant parts (ex: j0c-0003 nl for trays and j0c-0003nl t for tape & reel). pcb layout recommendations: 1. for maximum emi suppression (electromagnetic interference) place the decoupling capacitors adjacent to vcc and 50 connections. 2. connections to ground should be as short as possible. 3. connections between the 10/100 ic and the smt connector should be direct (ideally no change in direction) and of minimum length. ! " # $ % " # $ % &' ( & '( )' ( !)!! *' *++ &,-) . &,-) / &,0, / + )'/ &'. &'/ &'+& )'. 12 # 3 12 12 + , + , &,-, . $!*$!! 12 # 3 +- -, + 4 5 ! + + www.pulseeng.com 8 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 jv application note this line of 10/100base-tx smt rj45 1x1 connector magnetics modules has been specifically designed for the implementation of a 10base-t and 100base-tx transmission over data-grade unshielded twisted pair cable (utp-3, 5e and 6). the connectors provide excellent emi filtering and are suitable for adapter card and multiport applications. pulse has worked closely with the leading ic manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. the jv series meets the stringent open circuit inductance requirements imposed by ieee. when an 8ma dc current is applied across the transformer windings, the transformer will provide at least 350h. the transformers used in each module also provide 1500vrms minimum isolation, wide bandwidth with minimal attenuation and fast rise times to minimize system level jitter. the 1x1 smt rj45 connectors manufactured by pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. the smt are robust enough to withstand convection and infrared reflow solder temperatures. additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10mm (0.004") note: modules are packaged in trays, unless tape & reel is specified. please add the suffix " t " for tape & reel orders (ex: jv006i21 t ). add the suffix ? nl ? for rohs compliant parts (ex: jv006i21 nl for trays and jv006i21nl t for tape & reel). pcb layout recommendations: 1. for maximum emi suppression (electromagnetic interference) place the decoupling capacitors adjacent to vcc and 50 connections. 2. connections to ground should be as short as possible. 3. connections between the 10/100 ic and the smt connector should be direct (ideally no change in direction) and of minimum length. ! " # $ % " # $ % &' ( & '( )' ( .!!# "$ *++ &,-) . &,-) / &,0, / + )'/ &'. &'/ &'+& )'. 12 # 3 12 12 + , + , +- -, &,-, . $!*$!! 12 # 3 + 4 5 www.pulseeng.com 9 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 "#$"%& $$'#$()*)("+),% -".#$()*)("+),% j0c packaging specifications j0c series weight ..............7.07 grams tape & reel ............90/reel tray ........................80/tray tape ...................44x32mm tube ......................25/tube usa 858 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211 / 2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 www.pulseeng.com 10 j409.g (12/07) "#$"%& $$'#$()*)("+),% -".#$()*)("+),% jv packaging specifications p ulse j ack tm surface mount 1x1 jv series weight ...............6.6 grams tape & reel ..........150/reel tray ........................45/tray tape ...................44x32mm www.pulseeng.com 11 j409.g (12/07) usa 858 674 8100 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211/2 ? ? china 86 769 85538070 ? ? taiwan 886 3 4641811 p ulse j ack tm surface mount 1x1 -".#$()*)("+),% "#$"%& $$'#$()*)("+),% j3 packaging specifications j3 series weight ...............8.1 grams tape & reel ............75/reel tray ........................45/tray tape ...................56x32mm for more information: pulse worldwide headquarters 12220 world trade dr. san diego, ca 92128 u.s.a. www.pulseeng.com tel: 858 674 8100 fax: 858 674 8262 pulse south asia 150 kampong ampat #07-01/02 ka centre singapore 368324 tel: 65 6287 8998 fax: 65 6280 0080 pulse north asia no. 26 kao ching rd. yang mei chen tao yuan hsien taiwan, r. o. c. tel: 886 3 4641811 fax: 886 3 4641911 pulse china headquarters b402, shenzhen tech-innovation international tenth kejinan rd. high-tech industrial park nanshan district, shenzhen china tel: 86 755 33966678 fax: 86 755 33966700 pulse north china room 1503 xinyin building no. 888 yishan rd. shanghai 200233 china tel: 86 21 54643211/2 fax: 86 21 54643210 pulse europe einsteinstrasse 1 d-71083 herrenberg germany tel: 49 7032 7806 0 fax: 49 7032 7806 12 www.pulseeng.com j409.g (12/07) performance warranty of products offered on this data sheet is limited to the parameters specified. data is subject to change w ithout notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2007. pulse engineer ing, inc. all rights reserved. |
Price & Availability of JV011I21NL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |